Small Block 350 parts (Prosser)

QR Code Link to This Post

2 pair 193 heads, swirl port 64cc chambers, 1.94/1.50" valves, and center- bolt covers, these heads have after market valve springs for high lift cams. I have one 2104 Edelbrock preformer intake that match the bolt pattern for those heads. One set is brand new and the other set new but rebuilt. I want $350 each or $650 for both pair and $150 for the intake.
One scat crank for a 350c.i. $200 including flex plate. One 1 piece rear main seal crank shaft $150. One crank with flex plate 2 piece rear main seal, by the way the scat crank is a 2 piece rear main seal also, $150. One mini high torque starter sbc, $50. One regular starter sbc, $40. One full set of steel rocker arms and push rods, $75. One brand new sbc high lift cam but unsure of lift, it isn't stock cam, $100. Two sbc oil pans one is finned aluminum, both brand new $75 each. Two timing gear sets for sbc, one is double rolling timing set and the other is a single, $40 for the double and $30 for the single. Eight 0.40 over stock pistons on rods for sbc 350, $100

post id: 7918937543

posted: 2026-03-03 18:46

updated: 2026-03-12 07:35

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.

Small Block 350 parts - auto parts - by owner - vehicle automotive...

2 pair 193 heads, swirl port 64cc chambers, 1.94/1.50" valves, and center- bolt covers, these heads have after market valve springs for high lift cams. I have one 2104 Edelbrock preformer intake...